Quick answer
Yes, if both are true. More than 50% of your business income comes from construction. You paid a Canadian-resident subcontractor (sub) more than $500 in the year, not counting HST. File one T5018 slip for each such sub. It is due 6 months after your reporting period ends. The slip amount includes the HST.
Who this page is for
This page is for an Ontario electrician, plumber or HVAC owner who pays other businesses to do part of a job. You may be a sole proprietor or have a corporation. The slip rule is federal and the same for both.
It is not for these readers:
- You received a T5018 from a general contractor rather than issuing slips to your own subcontractors.
- Your helper works only for you, with your tools, on your schedule. That worker may be an employee who receives a T4 rather than a T5018.
- Your business is mostly not construction. You may need a T4A instead. See "What changes the answer".
See Price, Start Free if you want bookkeeping with HST filing priced for your corporation.
Contents
- Do you have to file a T5018? Three tests
- T5018 at a glance
- Worked example: three subs, one supply house, one year
- What changes the answer
- Before a sub starts: the WSIB clearance
- Common mistakes
- Next steps
- Sources
- Related pages
Do you have to file a T5018? Three tests
The T5018 is the Canada Revenue Agency (CRA) slip for contract payments in construction. All three tests below must be true for a given sub. This is a federal rule.
1. Construction is your main business. More than 50% of your business income must come from construction.
The CRA slip page lists electrical work, plumbing, air conditioning work, dry and wet heating, duct and sheet metal work and gas pipe work as construction. The regulation also covers installation, alteration and repair of a building. An owner whose jobs are all installs and repairs passes this test.
The CRA page does not say how it measures the share, by revenue or by hours. Do you also sell from a shop or rent out property? Then ask your accountant how the share is measured for you.
2. The sub is a resident of Canada. For a non-resident sub, CRA says to use a T4A-NR, the slip for fees paid to non-residents. The CRA page excludes non-residents. It does not excuse a sub for being incorporated. A sub that is a corporation still gets a slip.
3. You paid that sub more than $500 in the reporting period, not counting HST. Add up every payment to the sub, not one invoice. If a sub sells you materials and labour, CRA counts only the service part toward the $500 test, per the CRA page on fees for services. This is CRA administrative policy, not a line in the regulation.
Two more points:
- The year paid counts, not the invoice date. A payment belongs to the year you paid it. Cheque, cash, barter and an offset against an amount the sub owes you all count.
- You do not report a payment that is only for goods. The regulation skips an amount that is all for goods for sale. A supply house that sold you parts gets no slip.
T5018 at a glance
| Question | Answer | Federal or Ontario | Source |
|---|---|---|---|
| Is construction your main business? | More than 50% of business income | Federal | CRA slip page |
| Which subs need a slip? | Canadian residents paid more than $500 in the period, HST left out of the test | Federal | CRA slip page |
| What goes in box 22? | The amount paid, with HST included | Federal | CRA slip page |
| When is it due? | 6 months after the reporting period ends | Federal | When to file |
| Paper or online? | Online when you file more than 5 slips | Federal | How to file |
| Do I need a WSIB clearance for the sub? | Yes, before work begins, unless an exemption applies; valid up to 90 days | Ontario (WSIB) | WSIB policy 14-02-19 |
The two HST rules point in opposite directions. The $500 test leaves HST out. The box 22 amount puts HST in. Some guides state it backwards. The worked example shows the effect.
You choose the reporting period: calendar year or fiscal period. Once chosen, you cannot change it without the Minister's authorization, under section 238 of the Income Tax Regulations.
The due date is 6 months after the period ends. If that day is a weekend or holiday, the next business day is the deadline. See CRA, when to file.
For payments made in calendar 2026, the due date is 30 June 2027 (derived). For payments made in calendar 2027, it is 30 June 2028, a Friday (derived).
Worked example: three subs, one supply house, one year
All numbers below are made up.
Assumptions:
- Your corporation does electrical installs and repairs. Construction is well over half of your income.
- Your reporting period is the calendar year 2027.
- Every sub is a resident of Canada and charges 13% HST.
- The $500 test uses the amount before HST.
| Payee | Paid in 2027, before HST | Slip needed? | Box 22 amount |
|---|---|---|---|
| Electrician for one service call | $450 | No. $450 is not over $500 | none |
| Second electrical firm | $4,000 | Yes | $4,520 |
| Trenching sub: $3,000 paid in December | $3,000 | Yes | $3,390 |
| Electrical supply house, parts only | $6,000 | No. Goods only | none |
How each row works:
- Electrician for one service call. $450 is under the limit. With HST, the same invoice is $508.50 (derived: $450 × 1.13). That is over $500, but the test leaves HST out. No slip.
- Second electrical firm. $4,000 + $520 HST = $4,520 (derived: $4,000 × 0.13 = $520).
- Trenching sub. $3,000 + $390 HST = $3,390 (derived). You also owe this sub $2,000, invoiced in December and paid in January 2028. That $2,000 goes on the 2028 slip, not this one.
- Supply house. Parts only, so no slip, whatever the total.
Result: two slips. Box 22 totals $7,910 (derived: $4,520 + $3,390). The slips and the T5018 summary are due 30 June 2028 (derived).
Three ways to get this wrong:
- Leave out the HST. The slips would show $4,000 and $3,000. Together they are $910 too low (derived: $520 + $390).
- Add the HST before the test. The $508.50 for the service call would look like a slip. You would file one you did not need.
- Count by invoice date. The trenching sub's $2,000 would land on the 2027 slip, which would then show $5,650 (derived: $5,000 × 1.13).
One more trap: the test counts the whole period. If the electrician sends a $100 invoice in October, the total is $550. That is over $500, so you file a slip for $621.50 (derived: $550 × 1.13).
What changes the answer
- Construction is not your main business. You use a T4A, not a T5018. Example: a lighting retailer who does some installs. Here the HST rule is the reverse: a T4A leaves HST out. See CRA, payments of fees for services.
- You paid a sub $500 or less before HST. No slip. Add every payment in the period before you decide.
- The sub is a non-resident. Use a T4A-NR.
- One invoice mixes labour and materials. The goods-only skip applies only to an amount that is all for goods. A bundled invoice is not all goods. CRA counts only the service part toward the test. No CRA page we found says whether box 22 then holds the whole invoice or only the service part. Ask the sub to show materials on their own line. Then ask CRA or your accountant before you leave materials off a slip.
- The sub does not charge HST. A sub that is not registered for HST charges none. This is often a small supplier. Box 22 then equals what you paid. The CRA rule says to include HST "where applicable".
- A holdback is paid later. It goes on the slip for the year you pay it. HST on a holdback has its own timing. Read HST on holdbacks and progress billing.
- You use a fiscal period. The due date moves with it. A period ending 31 March 2027 is due 30 September 2027 (derived). See CRA, when to file.
- You file more than 5 slips. File them online. See CRA, how to file.
Before a sub starts: the WSIB clearance
Ontario (Workplace Safety and Insurance Board, WSIB). The T5018 comes after the work. This step comes before it.
If you directly hire a contractor to do construction work, you are the principal. A principal must get a WSIB clearance certificate before the work begins, and keep one in place for the whole job. See WSIB policy 14-02-19. A subcontractor you hire counts as a contractor, per the WSIB clearance FAQ.
A clearance protects you. While it is valid, WSIB gives up its right to make you pay the sub's unpaid premiums.
Without one, you may have to pay what the sub owes WSIB, up to the labour part of your contract with that sub. Hiring without a clearance is also an offence under Ontario's Workplace Safety and Insurance Act, 1997.
How it works:
- A clearance is valid for up to 90 days and can be renewed. A long job needs more than one.
- Most clearances expire on the 20th of February, May, August and November. Read the expiry date on the certificate. Do not count 90 days from the day it was issued.
- You can look up a contractor's clearance status on the WSIB site. You can search by business name, phone or address.
The home exemption is narrow. The policy exempts a householder who directly hires a contractor for exempt home renovation work, and a contractor the householder hires directly. You are not the householder. The wording does not say that a contractor who hires a sub on a home job is also exempt. Ask WSIB before you skip a clearance on a home job.
This is a separate question from your own WSIB cover as an owner. Read WSIB when you incorporate a trade business.
Read the WSIB policies: clearance certificates in construction, clearance certificate policy and the clearance FAQ.
Common mistakes
- Skipping the slip because the sub is a corporation. The CRA page excludes non-residents, not corporations.
- Having no business number or SIN for a sub at year end. The slip asks for the sub's 15-character business number or SIN. Ask for it when the sub first invoices you, not after you have paid.
- Testing a sub on the whole bill when the bill mixes materials and labour. CRA counts only the service part. A bill of $400 labour and $300 parts (made up) is $700 in total, but only $400 counts.
- Filing on paper. With more than 5 slips, you file online.
- Switching from calendar year to fiscal period. You need the Minister's authorization to change a period you have chosen.
- Letting a sub start without a WSIB clearance. The clearance must be in place before the work begins.
- Not watching a clearance's expiry date. Most expire on the 20th of February, May, August or November, so a clearance can run out mid-job.
Next steps
- Check test 1: is construction more than 50% of your business income?
- List every payee for the period. Write the date, the amount before HST and the HST. Total each sub before HST and compare with $500.
- For each sub over the line, get a business number or a SIN. Ask for it when the sub first invoices you.
- File the slips and the summary by the due date. File online if you have more than 5 slips. Use the CRA filing page. It also lists the late-filing penalties.
- Before the next sub starts, get a WSIB clearance and look the sub up on the WSIB site.
The quote prices bookkeeping with HST filing for your corporation. You enter your details and see a price before you commit.
Sources
- CRA, T5018 slip, statement of contract payments, modified 3 July 2025
- CRA, When to file information returns, modified 3 July 2025
- CRA, How to file information returns, modified 3 July 2025
- CRA, Payments of fees for services, modified 25 June 2026
- Income Tax Regulations, s. 238, current to 21 September 2026
- WSIB policy 14-02-19, Clearance certificate in construction, published 2 January 2020
- WSIB policy 14-02-04, Clearance certificate, effective 22 September 2025
- WSIB, Clearance FAQs, updated 20 July 2026
Related pages
- Contractor and trades accountant in Ontario: fixed-price corporate tax, bookkeeping and HST for Ontario trade corporations.
- Should a tradesperson incorporate in Ontario?: what else changes for a trade owner who incorporates.
- HST on holdbacks and progress billing: a holdback you pay later goes on that year's slip; its HST has its own timing.
- WSIB when you incorporate a trade business: your own WSIB cover, which is a different question from a sub's clearance.
